ST-RB156BR-R Pack 1 is a barrier kit that includes a ST-RB156BR-R model cabinet and a ST-RB036TA telescopic boom, the length of which can be adjusted from 3.5 to 6 m.

It can be used both independently and as part of an access control system for commercial, industrial or private facilities. This automatic barrier has a boom folding mechanism when an obstacle is detected and supports the auto-reverse function, and is equipped with all the necessary inputs and outputs for connecting peripheral devices and additionally supports the RS-485 interface and CAN bus.

By using the ST-RB036TA telescopic boom with adjustable length based on the ST-RB156BR-R Pack 1 automatic barrier , it is possible to implement controlled passage in areas from 3.5 to 6 meters wide. The boom itself is made of aluminum alloy, so it is not subject to corrosion and is suitable for year-round use in outdoor conditions. To control such a long boom, the automatic barrier kit includes a ST-RB156BR-R model pedestal, which has a built-in power mechanism that raises and lowers the boom at a fairly high speed - from 5 s, and an electronic unit with the ability to connect various peripheral devices.

The automatic barrier can operate autonomously or under ACS control thanks to the use of a multifunctional controller. Autonomous control is performed using a remote control (not included in the delivery set), and centralized control is performed using various identification devices, for example, ST-LR310E UHF readers for contactless control of vehicle passage, etc. In addition, the ST-RB156BR-R Pack 1 automatic barrier has inputs for connecting security equipment and a radio control receiver, can work in tandem with a traffic light, and also supports the RS485 interface and CAN bus.

The high working life of the barrier - up to 5 million cycles between failures, even when working with a boom at a maximum 6-meter length - is ensured by the use of a modern brushless motor. Depending on the specifics of the facility, the boom can be installed either with rigid fixation or with the possibility of using a folding mechanism, which allows you to move the boom to the side when a car runs over and, thus, avoid damage. Thanks to the implementation of the auto-reverse function, if an obstacle is detected during closing, the automatic barrier will not allow the boom to stop and will begin its movement in the opposite direction.

ARMO-Systems Presented the Automatic Barrier Smartec ST-RB156BR-R Pack 1 with a Passage Width of 3.5 to 6 Meters